How to operate Smartkey:

Set alarm induction

The remote controller is not in effective range (more than2 meters), short press on    button with light flash one time, one “Bi” sound from siren. The door will be locked at the same time, the system turn into alarm situation after 3 seconds.During driving, short press on     button, lock the doors by remote controller. Long press     button for 3 seconds, the light flash, the system enter anti-hijack status. When the car gives alarming, press    button shortly, the system will stop alarming

Disengage alarm induction

When car in alarm situation, Press    button shortly, light flash two times, two “Bi Bi” soundsfrom siren, doors unlocked at the same time, alarm is disengaged. During driving the car, short press    button, doors are unlocked. For normal situation, open the doors, press the    button for 3 seconds to close the intelligent identification function, press any button to resume

Remote start:

Long press the   button during the alarm status, the remote controller will tries 3 times to turn on the engine, if it succeed, the lights will flash 10 times. Open the door or depress on thepedal at this status, the light will flash 3 times and siren beeps 1 time, the engine will be turned off and return to the alarm status.  If press the  button under remote start status, the engine will be turned off and return to the original status

Truck release induction

Press    button for 3 seconds, the trunk is opened

Mute alarm setting induction:
Turn off the engine, close all the doors, leave the car more than 2 meters, Press   +            button at the same time, doors and windows will be locked with light flash one time, 3 seconds later, the system will be mute alarm situation. System cut off the power of the engine

Emergency alarming

Under alarming situation, open the door or depress the brake, the siren will alarm and the light will flash for 30 seconds and the car can not be started, press   button to stop the alarming..

Car searching:

When the car is in alarm status, press    +   button at the same time, the siren beeps 5 seconds, light flashes for 5 seconds for car searching.

Car washing or repairing mode

For normal situation, open the doors, press the    button for 3 seconds to close the intelligent identification function for car washing or repairing, press any button to resume RFID function.

Anti-Hijack mode
In Acc/on status, Long press     button for 3 seconds, the light flash, the system enter anti-hijack status, and then press    button, anti-hijack mode stopped.