Ford vehicles equipped with adaptive suspension or air suspension may occasionally require a suspension reset after component replacement, wheel alignment, battery disconnection, or when suspension warning messages appear. Resetting the system allows the suspension control module to relearn ride height values, sensor positions, and vehicle dynamics, helping restore proper ride quality and handling performance.
When Should You Reset the Suspension?
A suspension reset may be necessary after replacing shock absorbers, struts, ride height sensors, air springs, suspension control modules, steering components, or after performing a wheel alignment. It can also help resolve issues such as uneven vehicle height, suspension warning lights, poor ride comfort, or incorrect adaptive suspension operation.
The suspension reset procedure may vary depending on the Ford model and whether it is equipped with an adaptive or air suspension system. In general, you can follow these steps:
Park the vehicle on a level surface and engage the parking brake.
Turn the ignition off and wait for approximately 30 seconds.
Restart the vehicle and allow it to idle for a few minutes.
Use the vehicle's infotainment screen to navigate to Settings > Vehicle > Suspension (if available).
Select Reset Suspension, Ride Height Calibration, or a similar option.
Follow the on-screen instructions until the calibration process is complete.
Drive the vehicle at a moderate speed for several minutes to allow the suspension system to relearn its settings.
If the suspension warning light remains on or the vehicle height is still incorrect after the reset, a diagnostic scan tool may be required to recalibrate the suspension control module and clear any fault codes.
Always refer to the vehicle's service manual for model-specific procedures.